Skip to main content
Mobility
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to change the data limit settings on the ZTE MF275R

Go to Mobility support

Step 1 of 10

On your computer, connect to the Internet via the Turbo Hub and open a web browser.

On your computer, connect to the Internet via the Turbo Hub and open a web browser.

Step 2 of 10

Type http://setup.zte in the address bar, then press Enter on your keyboard.

Type http://setup.zte in the address bar, then press Enter on your keyboard. Type http://setup.zte in the address bar, then press Enter on your keyboard. Type http://setup.zte in the address bar, then press Enter on your keyboard. Type http://setup.zte in the address bar, then press Enter on your keyboard.

Step 3 of 10

Enter the password (default is admin) and then select Login.

Enter the password (default is admin) and then select Login.Enter the password (default is admin) and then select Login.Enter the password (default is admin) and then select Login.Enter the password (default is admin) and then select Login.

Step 4 of 10

Click Information.

Click Information.Click Information.Click Information.Click Information.

Step 5 of 10

Click Data Limit Settings.

Click Data Limit Settings.Click Data Limit Settings.Click Data Limit Settings.Click Data Limit Settings.

Step 6 of 10

Click Enable.

Click Enable.Click Enable.Click Enable.Click Enable.

Step 7 of 10

Click Data.

Click Data.Click Data.Click Data.Click Data.

Step 8 of 10

Enter the data limit amount.

Enter the data limit amount.Enter the data limit amount.Enter the data limit amount.Enter the data limit amount.

Step 9 of 10

Enter a percentage at which you will be notified that your data limit is approaching.

Enter a percentage at which you will be notified that your data limit is approaching.Enter a percentage at which you will be notified that your data limit is approaching.Enter a percentage at which you will be notified that your data limit is approaching.Enter a percentage at which you will be notified that your data limit is approaching.

Step 10 of 10

Click Apply to set your data limit.

Click Apply to set your data limit.Click Apply to set your data limit.Click Apply to set your data limit.Click Apply to set your data limit.
  1. On your computer, connect to the Internet via the Turbo Hub and open a web browser.
  2. Type http://setup.zte in the address bar, then press Enter on your keyboard.
  3. Enter the password (default is admin) and then select Login.
  4. Click Information.
  5. Click Data Limit Settings.
  6. Click Enable.
  7. Click Data.
  8. Enter the data limit amount.
  9. Enter a percentage at which you will be notified that your data limit is approaching.
  10. Click Apply to set your data limit.