Skip to main content
Dictate your search
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to pair your wireless HD receiver to a Home Hub 3000 modem

Slim

Steps to follow: 5

1.
Verify that the wireless receiver is turned on and that the connection instructions are displayed on the TV.

Verify that the wireless receiver is turned on and that the connection instructions are displayed on the TV.Verify that the wireless receiver is turned on and that the connection instructions are displayed on the TV.Verify that the wireless receiver is turned on and that the connection instructions are displayed on the TV.Verify that the wireless receiver is turned on and that the connection instructions are displayed on the TV.

Images may not be exactly as shown.

This tutorial should only be completed once you see the Fibe TV activation screen installation instructions on your TV screen and have completed the physical installation of the wireless HD receiver.

If this is a new receiver, continue to How to activate your wireless HD receiver once pairing is completed.

If you are not able to pair the device after following these steps, please contact us.

2.
Press and hold the WPS button on the Home Hub 3000 for 10 seconds until the 5-minute countdown begins.

Note: If you press the WPS button for less than 10 seconds, a 2-minute countdown will begin. The 2-minute countdown is used to connect mobile devices such as tablets and will not work with your Fibe TV receivers. Press the WPS button again to cancel the countdown.

Press and hold the WPS button on the Home Hub 3000 for 10 seconds until the 5-minute countdown begins.Note: If you press the WPS button for less than 10 seconds, a 2-minute countdown will begin. The 2-minute countdown is used to connect mobile devices such as tablets and will not work with your Fibe TV receivers. Press the WPS button again to cancel the countdown.Press and hold the WPS button on the Home Hub 3000 for 10 seconds until the 5-minute countdown begins.Note: If you press the WPS button for less than 10 seconds, a 2-minute countdown will begin. The 2-minute countdown is used to connect mobile devices such as tablets and will not work with your Fibe TV receivers. Press the WPS button again to cancel the countdown.

Images may not be exactly as shown.

This tutorial should only be completed once you see the Fibe TV activation screen installation instructions on your TV screen and have completed the physical installation of the wireless HD receiver.

If this is a new receiver, continue to How to activate your wireless HD receiver once pairing is completed.

If you are not able to pair the device after following these steps, please contact us.

3.
Within 3 minutes, press the OK button on the front of your receiver. Wait up to 5 minutes for the receiver to connect. Once connected, your receiver will automatically restart.

Note: It is normal for the lights on the receiver to flicker while restarting.

Within 3 minutes, press the OK button on the front of your receiver. Wait up to 5 minutes for the receiver to connect. Once connected, your receiver will automatically restart.Note: It is normal for the lights on the receiver to flicker while restarting.Within 3 minutes, press the OK button on the front of your receiver. Wait up to 5 minutes for the receiver to connect. Once connected, your receiver will automatically restart.Note: It is normal for the lights on the receiver to flicker while restarting.Within 3 minutes, press the OK button on the front of your receiver. Wait up to 5 minutes for the receiver to connect. Once connected, your receiver will automatically restart.Note: It is normal for the lights on the receiver to flicker while restarting.Within 3 minutes, press the OK button on the front of your receiver. Wait up to 5 minutes for the receiver to connect. Once connected, your receiver will automatically restart.Note: It is normal for the lights on the receiver to flicker while restarting.Within 3 minutes, press the OK button on the front of your receiver. Wait up to 5 minutes for the receiver to connect. Once connected, your receiver will automatically restart.Note: It is normal for the lights on the receiver to flicker while restarting.

Images may not be exactly as shown.

This tutorial should only be completed once you see the Fibe TV activation screen installation instructions on your TV screen and have completed the physical installation of the wireless HD receiver.

If this is a new receiver, continue to How to activate your wireless HD receiver once pairing is completed.

If you are not able to pair the device after following these steps, please contact us.

4.
Youʼll receive a notification on the TV screen once the wireless HD receive is paired with the Home Hub 3000.

Once connected, your receiver will automatically restart once again.

Youʼll receive a notification on the TV screen once the wireless HD receive is paired with the Home Hub 3000.Once connected, your receiver will automatically restart once again.Youʼll receive a notification on the TV screen once the wireless HD receive is paired with the Home Hub 3000.Once connected, your receiver will automatically restart once again.

Images may not be exactly as shown.

This tutorial should only be completed once you see the Fibe TV activation screen installation instructions on your TV screen and have completed the physical installation of the wireless HD receiver.

If this is a new receiver, continue to How to activate your wireless HD receiver once pairing is completed.

If you are not able to pair the device after following these steps, please contact us.

5.
Wait up to 5 minutes for the Fibe TV activation screen to appear on your TV.

Wait up to 5 minutes for the Fibe TV activation screen to appear on your TV.Wait up to 5 minutes for the Fibe TV activation screen to appear on your TV.Wait up to 5 minutes for the Fibe TV activation screen to appear on your TV.

Images may not be exactly as shown.

This tutorial should only be completed once you see the Fibe TV activation screen installation instructions on your TV screen and have completed the physical installation of the wireless HD receiver.

If this is a new receiver, continue to How to activate your wireless HD receiver once pairing is completed.

If you are not able to pair the device after following these steps, please contact us.