Skip to main content
Fibe TV
Log in
Your current region:   Ontario
Select your province or territory below:
Close province setting

Bell MTS Black URC6246 remote

This service is only available to MTS customers in Manitoba. To find support for your region, please select your province.

Getting Started

Make sure your TV is on before starting remote control setup.

  1. Remove battery cover.
  2. Insert 2 AA batteries, match the + and - marks.
  3. Replace battery cover

Tip: The LED will blink 5 times with each key press when batteries need replacement.

Setup Method A: Popular Brands

Make sure your TV is on before starting remote control setup.

  1. Press and hold SETUP until LED blinks twice.
  2. Press the TV POWER key.
  3. Press and hold down the DIGIT key (1 through 0) for your TV brand.
    Digit TV
    1 Insignia / Dynex
    2 LG / Zenith
    3 Mitsubishi
    4 Panasonic
    5 Phillips / Magnavox
    6 Samsung
    7 Sharp
    8 Sony
    9 Toshiba
    10 Vizio

    Tip: The LED will blink 5 times with each key press when batteries need replacement.

  4. Let go of the key when your TV turns off.

    Notes:

    • 2 blinks = Success
    • 1 long blink = Failure

Setup is complete. If setup has failed, begin again at step one or try another setup method.

Setup Method B: Code Search

Make sure your TV is on before starting remote control setup.

  1. Press and hold SETUP until LED blinks twice.
  2. Press the TV POWER key.
  3. Press and hold down the OK/SELECT key.
  4. Let go of the OK/SELECT key when the TV turns off.

Setup is complete. If setup has failed, begin again at step one or try another setup method.

Setup Method C: Direct Code Entry

Make sure your TV is on before starting remote control setup.

  1. Press the TV POWER key.
  2. Press and hold SETUP until LED blinks twice.

  3. Enter the first TV code for your brand from the code list at the end of the URC6246 User Guide (PDF 6.02 MB).

    Note: A URC6246 User Guide was also provided with your remote control.

  4. Press and hold TV POWER key to test TV control.

    • If the TV turns off, setup is complete.
    • If the TV does not turn off, repeat this process using the next code for your TV brand.

If setup has failed, begin again at step one or try another setup method.

Black URC6246 remote buttons

Image of the Black URC6246 remote with buttons labelled

Troubleshooting your Bell MTS Black URC6246 remote

LED does not blink when a key is pressed

Replace batteries.

TV does not respond when TV POWER or VOLUME keys are pressed

Program remote control for your TV brand using instructions for Setup Method A, B or C for programming the Black URC6246 remote.

Tried all codes for my TV brand and none work

Try code search (Setup Method B) for programming the Black URC6246 remote.