1. To find the remote code for the device, open a web browser and go to Bell.ca/tvremotecodes
Note: To program your remote, 4 digits are required. If the remote code for the device you want to program is only 3 digits, add a 0 to program a TV; add a 1 to program a VCR or DVD player; add a 2 to program a tuner or amplifier. I.e. to program a TV where the remote code is 500, enter 0500.
2. Press and hold AUX until SAT, TV and VCR light up.
Note: To program your remote, 4 digits are required. If the remote code for the device you want to program is only 3 digits, add a 0 to program a TV; add a 1 to program a VCR or DVD player; add a 2 to program a tuner or amplifier. I.e. to program a TV where the remote code is 500, enter 0500.
3. Release AUX, it will start to flash.
Note: To program your remote, 4 digits are required. If the remote code for the device you want to program is only 3 digits, add a 0 to program a TV; add a 1 to program a VCR or DVD player; add a 2 to program a tuner or amplifier. I.e. to program a TV where the remote code is 500, enter 0500.
4. Enter one of the codes for your device, then press #. AUX should flash 3 times.
Note: To program your remote, 4 digits are required. If the remote code for the device you want to program is only 3 digits, add a 0 to program a TV; add a 1 to program a VCR or DVD player; add a 2 to program a tuner or amplifier. I.e. to program a TV where the remote code is 500, enter 0500.
5. Try to control the other device. If it doesn't work, use one of the other codes from the list at: Bell.ca/tvremotecodes
Note: To program your remote, 4 digits are required. If the remote code for the device you want to program is only 3 digits, add a 0 to program a TV; add a 1 to program a VCR or DVD player; add a 2 to program a tuner or amplifier. I.e. to program a TV where the remote code is 500, enter 0500.
