Mobility

Home

How to charge my Arlo Go

Arlo Go

Steps to follow: 4

Your Arlo Go comes with the battery partially charged. When you first set it up, you will need to charge the battery.
Open the rubber cover on the back of the Arlo Go.
Connect the power adapter to the camera.

Caution: You must use an Arlo Go power adapter to charge the battery. Do not try to power the camera or charge the battery with any power adapter other than the one provided with the Arlo Go camera. Do not use the Arlo Go power adapter with any other device. Do not use the Arlo Go power adapter to power the camera or charge the battery outdoors.
Plug the power adapter into an electrical outlet.

The LED blinks fast blue for three seconds when the power adapter is connected. When the camera battery is fully charged, the LED blinks fast blue for two seconds.

1. Your Arlo Go comes with the battery partially charged. When you first set it up, you will need to charge the battery.

Illustration of this step

2. Open the rubber cover on the back of the Arlo Go.

Illustration of this step

3. Connect the power adapter to the camera.

Caution: You must use an Arlo Go power adapter to charge the battery. Do not try to power the camera or charge the battery with any power adapter other than the one provided with the Arlo Go camera. Do not use the Arlo Go power adapter with any other device. Do not use the Arlo Go power adapter to power the camera or charge the battery outdoors.

Illustration of this step

4. Plug the power adapter into an electrical outlet.

The LED blinks fast blue for three seconds when the power adapter is connected. When the camera battery is fully charged, the LED blinks fast blue for two seconds.

Illustration of this step

Was this article useful?

Recently viewed articles