1.
Turn on the Wireless Receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.

Images may not be exactly as shown.

Follow the steps on the left to pair each Fibe TV Wireless Receiver (VIP2505) with the Wireless Receiver Transmitter (VAP2500 or VAP3400).

If you are not able to pair the devices after following the steps, please contact us for help

2.
Once you see the connection instructions appear on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.

Once you see the connection instructions appear on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.

Images may not be exactly as shown.

Follow the steps on the left to pair each Fibe TV Wireless Receiver (VIP2505) with the Wireless Receiver Transmitter (VAP2500 or VAP3400).

If you are not able to pair the devices after following the steps, please contact us for help

3.
On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.

Images may not be exactly as shown.

Follow the steps on the left to pair each Fibe TV Wireless Receiver (VIP2505) with the Wireless Receiver Transmitter (VAP2500 or VAP3400).

If you are not able to pair the devices after following the steps, please contact us for help

4.
Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.

Images may not be exactly as shown.

Follow the steps on the left to pair each Fibe TV Wireless Receiver (VIP2505) with the Wireless Receiver Transmitter (VAP2500 or VAP3400).

If you are not able to pair the devices after following the steps, please contact us for help

5.
Within 2 minutes, go back to the Wireless Receiver and press the OK button.

Images may not be exactly as shown.

Follow the steps on the left to pair each Fibe TV Wireless Receiver (VIP2505) with the Wireless Receiver Transmitter (VAP2500 or VAP3400).

If you are not able to pair the devices after following the steps, please contact us for help

6.
The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.

Images may not be exactly as shown.

Follow the steps on the left to pair each Fibe TV Wireless Receiver (VIP2505) with the Wireless Receiver Transmitter (VAP2500 or VAP3400).

If you are not able to pair the devices after following the steps, please contact us for help

SHOP MOBILITY

SHOP INTERNET

SHOP BUNDLES

SHOP HOME PHONE

Need help?

How to pair the Fibe Wireless Receiver (VIP2502) to the Wireless Receiver Transmitter (VAP2500)

Nova

1.
Turn on the Wireless Receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.

2.
Once you see the connection instructions appear on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.

3.
On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.

4.
Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.

5.
Within 2 minutes, go back to the Wireless Receiver and press the OK button.

6.
The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.

Need help?

How to pair the Fibe Wireless Receiver (VIP2502) to the Wireless Receiver Transmitter (VAP2500)

Nova

1. Turn on the Wireless Receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.

2. Once you see the connection instructions appear on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.

3. On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.

4. Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.

5. Within 2 minutes, go back to the Wireless Receiver and press the OK button.

6. The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.

1.
Turn on the Wireless Receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.

2.
Once you see the connection instructions appear on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.

3.
On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.

4.
Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.

5.
Within 2 minutes, go back to the Wireless Receiver and press the OK button.

6.
The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.