Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver.
Images may not be exactly as shown.
If your television signal has been lost:
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in.
2.
Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.
Images may not be exactly as shown.
If your television signal has been lost:
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in.
3.
Once you've set up your transmitter, turn on the device.
Images may not be exactly as shown.
If your television signal has been lost:
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in.
4.
On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.
Images may not be exactly as shown.
If your television signal has been lost:
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in.
5.
Press the transmitter's WPS button. The bottom green light will begin to flash.
Images may not be exactly as shown.
If your television signal has been lost:
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in.
6.
Within 2 minutes, go back to your receiver and press OK.
Images may not be exactly as shown.
If your television signal has been lost:
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in.
7.
The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press SELECT to watch TV.
Images may not be exactly as shown.
If your television signal has been lost:
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in.