What are the Single and Dual Modes on my Bell Satellite TV receiver and how do I use them?
LIMITED WARRANTY – BATTERY FOR BELL FIBRE EQUIPMENT
Limited Warranty. Bell Canada (including Bell Aliant, a division of Bell Canada) (“Bell”) warrants to you as the original purchaser (“Purchaser” or “you”) the battery purchased for the Fibre Equipment (“Original Battery”) for a period of 12 months from the date of purchase of the Original Battery from Bell (“Warranty Period”) when used in the Fibre Equipment (“Warranty”). “Fibre Equipment” means the Home Hub 3000 modem or UPS (uninterruptible power supply), as applicable, provided by Bell in connection with certain of your Bell services. If the Original Battery fails due to a defect during the Warranty Period, Bell will replace the Original Battery with a new or refurbished battery (“Replacement Battery”). Any warranty coverage that remains during the Warranty Period on the Original Battery (when replaced with a Replacement Battery under this Warranty) will apply to the Replacement Battery. No Replacement Battery has any new or separate warranty coverage. Bell reserves the right to limit the number of Replacement Batteries provided to Purchaser during the Warranty Period.
My Battery Isn’t Working. What Should I Do? Ontario and Québec residents please call Bell at 1 866 310 BELL (2355) and residents of the Atlantic provinces please call 1 866 342-7367, so that Bell can confirm that the Original Battery is within the Warranty Period and attempt to diagnose and correct the malfunction over the telephone. Be sure to keep your proof of purchase to establish the date of purchase of the Original Battery; otherwise Bell may have to estimate the date of purchase.
Limited Warranty Exclusions. This Warranty does not cover any Original Battery or Replacement Battery (each, a Battery) that is:
damaged due to: abuse, neglect, misuse, accident, theft, vandalism, force majeure events (e.g. fire, flooding, infestation, freezing, power-surge), overcharging or alteration; improper or unauthorized repair, maintenance, installation, set-up or storage; or accessories, wiring or cabling;
merely discharged and can be recharged and returned to service;
in Fibre Equipment at a location other than a Bell service address or in a modem or device other than the Fibre Equipment; or
not owned by the Purchaser.
Exclusive Warranty. To the extent permitted by applicable law (which may vary province to province) and except where prohibited for Québec residents, this Warranty is exclusive and is in lieu of all other warranties, representations, guarantees, terms and conditions, express and/or implied, including merchantability and fitness for a particular purpose. In addition to the rights described in this Warranty, Purchaser may also have other legal rights (which may vary province to province).
Limitation of Liability. To the extent permitted by applicable law and except where prohibited for Quebec residents, Bell's total cumulative maximum liability for negligence, breach of contract, tort or any other claims or causes of action, including fundamental breach, in connection with any Battery or this Warranty is limited to payment, upon request, for actual and direct damages up to a maximum amount equal to the purchase price of the Original Battery, and all other damages, including without limitation indirect, special, consequential, incidental, economic, exemplary or punitive damages, are excluded. You may also be subject to other limitations and exclusions of liability, and obligations, as set out in any Bell terms of service that apply to you. These terms survive the expiry of the Warranty.
Severability; Assignment; Effective Date; Agreement. If any provision of this Warranty is unenforceable, all remaining provisions of this Warranty remain in full force and effect. This Warranty is not assignable by Purchaser. Original Warranty applies only to batteries purchased on or after April 23, 2017 until amended or superceded by Bell. You accept the terms of this Warranty on the earlier of the date you receive a copy or use the Original Battery. If you do not agree with the terms of this Warranty, you have 30 days from the date of your original purchase to return the Original Battery to Bell, unused, for a refund.
More Information. For more information, Ontario and Québec residents should visit www.bell.ca/battery or call Bell at 1 866 310 BELL (2355). Atlantic residents please visit www.bellaliant.ca/battery or call 1 866 342 7367.
Recycling instructions Bell supports provincial battery recycling programs by remitting Environmental Handling Fees for designated products. For more information about the designated battery types and recycling depot locations, please visit the Call2recycle web-site http://www.call2recycle.ca/.
April 23, 2017 Corporate Secretary’s Office of Bell Canada, Bell Satellite TV (Bell ExpressVu), Bell Mobility, Bell Media and Bell Aliant. 1 carrefour Alexander-Graham-Bell, Building A-7, Verdun, Québec, H3E 3B3
What's the difference between Single and Dual Mode?
NOTE: Applicable to 9242 HD PVR only.
Your 9242 dual-tuner satellite receiver lets you watch programming on two separate TVs. The way this programming is delivered changes depending on whether the receiver is set to Single or Dual Mode.
In Single Mode, you can use features like Picture-In-Picture (PIP) and you can watch one live program while recording another. With Shared View enabled, all connected TVs can receive the same programming at the same time.
In Dual Mode, you can watch different programming on two separate TVs. In each location you can record a live program and watch a pre-recorded program at the same time. (Note: Picture-In-Picture is not available while in Dual Mode)
To find out which mode you're in, check the Mode indicator on the front panel of your receiver. Your menus and other screens will also indicate which mode you're in (as shown below).
How does one receiver deliver programming to two TVs?
The diagram below shows how one receiver delivers programming to two TVs:
Nearby TV – programming is delivered to the TV near the receiver (TV1) using short audio/video cables and is controlled using Remote Control 1. The picture displayed on the nearby TV is always in high definition (HD).
Remote TV – programming is delivered to a TV located in another room (TV2) using existing in-home coaxial cable and is controlled using Remote Control 2. The picture displayed on the remote TV is always in standard definition (SD).
Note: Programming can be controlled by either remote when in Single Mode.
How to use the Shared View option when in Single Mode
When in Single Mode, the Shared View option lets you watch the same programming on both the Nearby TV (TV1) and the Remote TV (TV2). If you disable Shared View, you will not receive programming on the Remote TV (TV2).
To enable Shared View:
Press MENU on your remote control.
Press 6 for System Setup.
Press 2 for Shared View. Note: If you're unable to change the options in the Shared View menu, it means that your receiver is set to Dual Mode. You'll need to switch your receiver to Single Mode before you begin .
Press the left arrow button to select Enable View. To disable the feature, select Disable View.
How to switch between Single and Dual Mode
To switch between Single Mode and Dual Mode, locate the MODE button behind the right front panel door of your receiver.
To change from Single Mode to Dual Mode press the MODE button once.
To change from Dual Mode to Single Mode press the MODE button twice.