Skip to main content
Internet

How to configure the guest Wi-Fi network on my Home Hub 3000 modem

Steps to follow:

  1. Open a web browser.
  2. Enter the following in the address bar:

    Address bar

    Images may not be exactly as shown.

    • When connected to the Internet, enter “bell.ca/mymodem”.
    • If you’re not connected, enter “192.168.2.1”.
  3. Click on Manage my Wi-Fi.

    Manage my Wi-Fi option

    Images may not be exactly as shown.

  4. If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.
  5. Ensure the Guest Wi-Fi network is set to the ON position.

    Guest Wi-Fi network toggle

    Images may not be exactly as shown.

  6. If you want, you can change the network name and password to something easier to remember.

    Tip: You can add the word "guest" to the network name to distinguish it from your primary network.

    Guest Wi-Fi network name and password

    Images may not be exactly as shown.

  7. Click the Save button to save your changes.

Join the conversation in our community forums

Find even more support by searching topics or posting questions in our forum.

Bell_Community_EN Join the conversation by scanning the QR code.