Step 1 of 8
Open a web browser.
Step 2 of 8
Enter the following in the address bar:
- When connected to the Internet, enter “ bell.ca/mymodem ”.
- If you’re not connected, enter “ 192.168.2.1 ”.
Step 3 of 8
Click on Fibe Internet.
Step 4 of 8
If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.
Step 5 of 8
Click on Settings.
Step 6 of 8
Enter your Bell Internet user ID (b1xxxxxx) and password.
Step 7 of 8
Click on Connect (or Save).
Step 8 of 8
You will see a green check under the Fibe Internet service in approximately 10 seconds.