The Netgear 4G MVBR1210C Turbo Hub is ready to go straight out of the box. If you want to view or change its settings, use a web browser to log in to the router.
Step 1 of 12
Go to http://www.routerlogin.net using a web browser.
Images may not be exactly as shown.
Step 2 of 12
Enter the user name and password. The default user name is admin and the default password is password.
Images may not be exactly as shown.
Step 3 of 12
Click Log In.
Images may not be exactly as shown.
Step 4 of 12
Wait while the Turbo Hub checks for firmware updates.
Images may not be exactly as shown.
Step 5 of 12
Click Setup Wizard.
Images may not be exactly as shown.
Step 6 of 12
Click Next.
Images may not be exactly as shown.
Step 7 of 12
Select your Internet Connection Mode and click Next.
Images may not be exactly as shown.
Step 8 of 12
You may be asked for your Login (admin) and Password (password) again. Click Next to continue.
Images may not be exactly as shown.
Step 9 of 12
Wait for the settings to update.
Images may not be exactly as shown.
Step 10 of 12
Once you have connected, click Next.
Images may not be exactly as shown.
Step 11 of 12
Configure your Network Name (SSID) and Wi-Fi Security. Click Next to continue.
Images may not be exactly as shown.
Step 12 of 12
Review your summary and click Finish.
Images may not be exactly as shown.
Go to http://www.routerlogin.net using a web browser.
Enter the user name and password. The default user name is admin and the default password is password.
Click Log In.
Wait while the Turbo Hub checks for firmware updates.
Click Setup Wizard.
Click Next.
Select your Internet Connection Mode and click Next.
You may be asked for your Login (admin) and Password (password) again. Click Next to continue.
Wait for the settings to update.
Once you have connected, click Next.
Configure your Network Name (SSID) and Wi-Fi Security. Click Next to continue.