Skip to main content
Bell Satellite TV
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to set up the Satellite TV Wi-Fi adapter

9400 - Whole Home PVR

Steps to follow: 6

1.
Connect the Wi-Fi adapter to a USB port on the front or back panel of your receiver. Wait until Attention 396 appears on your TV screen.

Connect the Wi-Fi adapter to a USB port on the front or back panel of your receiver. Wait until Attention 396 appears on your TV screen.Connect the Wi-Fi adapter to a USB port on the front or back panel of your receiver. Wait until Attention 396 appears on your TV screen.

2.
Select Setup.

Select Setup.Select Setup.Select Setup.Select Setup.Select Setup.

3.
Choose your home Wi-Fi network and select Done.

Choose your home Wi-Fi network and select Done.Choose your home Wi-Fi network and select Done.Choose your home Wi-Fi network and select Done.Choose your home Wi-Fi network and select Done.

4.
Enter your Wi-Fi password (or encryption key) and select Done.

Enter your Wi-Fi password (or encryption key) and select Done.Enter your Wi-Fi password (or encryption key) and select Done.Enter your Wi-Fi password (or encryption key) and select Done.Enter your Wi-Fi password (or encryption key) and select Done.

5.
Your receiver will test the Wi-Fi connection. When the test is complete, select Done.

Your receiver will test the Wi-Fi connection. When the test is complete, select Done.Your receiver will test the Wi-Fi connection. When the test is complete, select Done.Your receiver will test the Wi-Fi connection. When the test is complete, select Done.Your receiver will test the Wi-Fi connection. When the test is complete, select Done.Your receiver will test the Wi-Fi connection. When the test is complete, select Done.

6.
The Wi-Fi signal strength is displayed. Select OK to complete the setup.

The Wi-Fi signal strength is displayed. Select OK to complete the setup.The Wi-Fi signal strength is displayed. Select OK to complete the setup.The Wi-Fi signal strength is displayed. Select OK to complete the setup.The Wi-Fi signal strength is displayed. Select OK to complete the setup.The Wi-Fi signal strength is displayed. Select OK to complete the setup.