Setting up my Tracker
See the Quick Start Guide for setup instructions.
Inviting someone to monitor my Tracker
- Launch the SmartThings app.
- Select the menu icon (three lines) at the top-left of the app homepage.
- Select Members.
- Select Add member.
- There are two options available:
- Invite a nearby person using the QR code.
- Invite someone using a Samsung account.
Sending a report on my Tracker’s location
You can send a location report to the SmartThings app from your tracker by pressing the power button twice. This will send an alert to all members connected to that tracker.
Maximizing my Tracker’s battery life
The battery of the Samsung SmartThings Tracker can generally last about a week on a single charge. You can optimize its battery life by enabling power saving mode, which will turn the tracker off during periods of inactivity. When power saving mode is enabled, the tracker will pause location updates. It will also pause location updates when it does not sense motion or it is not used for approximately 30 minutes.
To activate power saving mode in the SmartThings app:
- Select the tracker.
- Select the three dots at the top-right corner.
- Select Settings.
- Select Power saving mode.
- Toggle power saving mode from OFF to ON.
- Configure the days/times to enable power saving mode.
- Select Done.
Unpairing my Tracker from the app
- Launch the SmartThings app.
- Select the menu icon (three lines) at the top-left of the app homepage.
- Select Devices.
- Select the three dots at the top-right corner.
- Select Edit.
- Select the minus button beside the tracker you’d like to remove.
- Select Delete.