How to configure the advanced settings on my Novatel Wireless MiFi 2

Go to Mobility supportGo to Mobility support

Step 1 of 13

In your computer's Web Browser, type http://my.mifi in the address bar and press the Enter or Return key.
You must already be connected to your Novatel Wireless MiFi 2 in order to access this page.

Images may not be exactly as shown.

Step 2 of 13

Click Log In.

Images may not be exactly as shown.

Step 3 of 13

Enter the password, the default is admin.

Images may not be exactly as shown.

Step 4 of 13

Click Log In.

Images may not be exactly as shown.

Step 5 of 13

Click Settings.

Images may not be exactly as shown.

Step 6 of 13

Click Advanced Settings.

Images may not be exactly as shown.

Step 7 of 13

To allow connected devices to establish a VPN tunnel to a remote server or device, click the ON/OFF switch to ON.

Images may not be exactly as shown.

Step 8 of 13

Click LAN.
The MiFi 2 is shipped preconfigured to use IP addresses in a range for use in private networks, and should be suitable for most uses. If your network has a requirement to use different IP addresses, you can make those changes in the LAN section.
Attention: Altering these settings could stop your hotspot from working properly.

Images may not be exactly as shown.

Step 9 of 13

Enter the new LAN settings.

Images may not be exactly as shown.

Step 10 of 13

Click Save Changes.

Images may not be exactly as shown.

Step 11 of 13

Click Port Filtering.

Images may not be exactly as shown.

Step 12 of 13

To restrict internet traffic to specific applications, click the Port Filtering ON/OFF switch to ON.

Images may not be exactly as shown.

Step 13 of 13

Select the applications you want to allow, then click Save Changes.

Images may not be exactly as shown.

How to configure the advanced settings on my Novatel Wireless MiFi 2

Was this article useful?