Step 1 of 13
Solid blue
• The camera is registered and is connected to the mobile network.
• The camera is registered and is connected to the mobile network.
Step 2 of 13
Very slow blinking blue
• The camera is powering on.
• The camera is powering on.
Step 3 of 13
Slow blinking blue
• The camera is ready to scan the QR code displayed in the Arlo app.
• The camera is ready to scan the QR code displayed in the Arlo app.
Step 4 of 13
Blinking blue
• The camera is scanning the QR code displayed in the Arlo app.
• The camera is scanning the QR code displayed in the Arlo app.
Step 5 of 13
Fast blinking blue
• The camera is connected to the cloud.
• During charging, blinking for three seconds indicates that charging started and blinking for two seconds indicates that charging is complete.
• The camera is connected to the cloud.
• During charging, blinking for three seconds indicates that charging started and blinking for two seconds indicates that charging is complete.
Step 6 of 13
Blinking blue and purple
• The camera is connecting to the network and the cloud.
• The camera is connecting to the network and the cloud.
Step 7 of 13
Solid amber
• No SIM card is inserted or the SIM card is damaged or not active.
• During a sync, the battery charge is low.
• During the motion detection test, motion is detected.
• No SIM card is inserted or the SIM card is damaged or not active.
• During a sync, the battery charge is low.
• During the motion detection test, motion is detected.
Step 8 of 13
Blinking amber
• Mobile network coverage is not available.
• Mobile network coverage is not available.
Step 9 of 13
Slow blinking amber
• The battery level is low.
• The battery level is low.
Step 10 of 13
Double blinking amber
• The battery level is so low that it is critical.
• The battery level is so low that it is critical.
Step 11 of 13
Blinking amber and purple
• The SD card type is invalid.
• The SD card type is invalid.
Step 12 of 13
Blinking amber and blue
• The camera is receiving a firmware upgrade.
• The camera is receiving a firmware upgrade.
Step 13 of 13
Fast blinking amber
• The camera connected to the mobile network but it cannot connect to the cloud.
• During a QR code scan, the scan failed.
• During battery charging, the charge failed.
• The camera connected to the mobile network but it cannot connect to the cloud.
• During a QR code scan, the scan failed.
• During battery charging, the charge failed.
