Skip to main content
Internet
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to perform a speed test from my Home Hub 4000/Giga Hub modem

Internet support

Step 1 of 9

Open a web browser.

Open a web browser.

Step 2 of 9

Enter the following in the address bar:

  • When connected to the Internet, enter “ bell.ca/mymodem ”.
  • If you’re not connected, enter “ 192.168.2.1 ”.

Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”. /><img src=Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.

Step 3 of 9

Click Speed test.

Click on Fibe Internet. Click on Fibe Internet.

Step 4 of 9

If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.

Click on Fibe Internet. If prompted, enter the administrator password. Unless you have changed it, the default password is "admin". If prompted, enter the administrator password. Unless you have changed it, the default password is "admin". If prompted, enter the administrator password. Unless you have changed it, the default password is "admin".

Step 5 of 9

Select Block all local network activity to temporarily disable network activity that could impact the results.

Click on Fibe Internet. Select Block all local network activity to temporarily disable network activity that could impact the results. Select Block all local network activity to temporarily disable network activity that could impact the results. Select Block all local network activity to temporarily disable network activity that could impact the results.

Step 6 of 9

Click Start test.

Click on Fibe Internet. Click Start test. Click Start test. Click Start test.

Step 7 of 9

The following message will appear. Click Continue.

Note: This will disable your Fibe Internet for the duration of the test.

Click on Fibe Internet. The following message will appear. Click Continue.Note: This will disable your Fibe Internet for the duration of the test. The following message will appear. Click Continue.Note: This will disable your Fibe Internet for the duration of the test. The following message will appear. Click Continue.Note: This will disable your Fibe Internet for the duration of the test.

Step 8 of 9

Wait for the speed test to be completed.

Click on Fibe Internet.

Step 9 of 9

Review the results…

If you selected to block all local network activity, the measured download speed should be about the same as the Internet service youʼre subscribed to.

Click on Fibe Internet.
  1. Open a web browser.
  2. Enter the following in the address bar:
    • When connected to the Internet, enter “ bell.ca/mymodem ”.
    • If you’re not connected, enter “ 192.168.2.1 ”.
  3. Click Speed test.
  4. If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.
  5. Select Block all local network activity to temporarily disable network activity that could impact the results.
  6. Click Start test.
  7. The following message will appear. Click Continue.

    Note: This will disable your Fibe Internet for the duration of the test.
  8. Wait for the speed test to be completed.
  9. Review the results…

    If you selected to block all local network activity, the measured download speed should be about the same as the Internet service youʼre subscribed to.