Skip to main content
Internet
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to configure the primary Wi-Fi network on my Home Hub 4000/Giga Hub modem (basic)

Internet support

Step 1 of 7

Open a web browser.

Open a web browser.

Step 2 of 7

Enter the following in the address bar:

  • When connected to the Internet, enter “ bell.ca/mymodem ”.
  • If you’re not connected, enter “ 192.168.2.1 ”.

Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”. /><img src=Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.

Step 3 of 7

Click on Manage my Wi-Fi.

Click on Fibe Internet. Click on Fibe Internet.

Step 4 of 7

If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.

Click on Fibe Internet. If prompted, enter the administrator password. Unless you have changed it, the default password is "admin". If prompted, enter the administrator password. Unless you have changed it, the default password is "admin". If prompted, enter the administrator password. Unless you have changed it, the default password is "admin".

Step 5 of 7

Ensure your Primary Wi-Fi network is set to ON.

Click on Fibe Internet. Ensure your Primary Wi-Fi network is set to ON. Ensure your Primary Wi-Fi network is set to ON. Ensure your Primary Wi-Fi network is set to ON.

Step 6 of 7

If you want, you can change the network name and password to something easier to remember.

Click on Fibe Internet.If you want, you can change the network name and password to something easier to remember.If you want, you can change the network name and password to something easier to remember.If you want, you can change the network name and password to something easier to remember.

Step 7 of 7

Click the Save button to save your changes.

Click on Fibe Internet. Click the Save button to save your changes. Click the Save button to save your changes. Click the Save button to save your changes.
  1. Open a web browser.
  2. Enter the following in the address bar:
    • When connected to the Internet, enter “ bell.ca/mymodem ”.
    • If you’re not connected, enter “ 192.168.2.1 ”.
  3. Click on Manage my Wi-Fi.
  4. If prompted, enter the administrator password. Unless you have changed it, the default password is the serial number located on the sticker on the back of the modem.
  5. Ensure your Primary Wi-Fi network is set to ON.
  6. If you want, you can change the network name and password to something easier to remember.
  7. Click the Save button to save your changes.