Skip to main content
Internet
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to connect devices to the Wi-Fi network on my Home Hub 1000 using WPS

Internet support

Step 1 of 3

Turn on your computer or wireless device.

Turn on your computer or wireless device.

Step 2 of 3

Press and hold the WPS button on your modem for 5 seconds, until the WPS light starts blinking.

You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.

Press and hold the WPS button on your modem for 5 seconds, until the WPS light starts blinking.You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.Press and hold the WPS button on your modem for 5 seconds, until the WPS light starts blinking.You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.Press and hold the WPS button on your modem for 5 seconds, until the WPS light starts blinking.You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.Press and hold the WPS button on your modem for 5 seconds, until the WPS light starts blinking.You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.Press and hold the WPS button on your modem for 5 seconds, until the WPS light starts blinking.You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.

Step 3 of 3

Press and hold the WPS button on your computer or Wi-Fi device for 5 seconds. The password for your primary Wi-Fi network will automatically load into the device and connect to the network.

Press and hold the WPS button on your computer or Wi-Fi device for 5 seconds. The password for your primary Wi-Fi network will automatically load into the device and connect to the network.
  1. Turn on your computer or wireless device.
  2. Press and hold the WPS button on your modem for 5 seconds, until the WPS light starts blinking.

    You will have 2 minutes to connect your Wi-Fi device. If you do not complete the process in time you will need to restart this step.
  3. Press and hold the WPS button on your computer or Wi-Fi device for 5 seconds. The password for your primary Wi-Fi network will automatically load into the device and connect to the network.