1. Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver. If you have a coaxial connection, use the wrench provided to tighten the cable. Be careful not to over tighten.
Images may not be exactly as shown.
Use this tutorial when replacing your PVR receiver with another PVR receiver.
If your television signal has been lost:
-
Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
-
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
2. Connect the replacement receiver to a power outlet and it will automatically turn itself on within several minutes.
Images may not be exactly as shown.
Use this tutorial when replacing your PVR receiver with another PVR receiver.
If your television signal has been lost:
-
Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
-
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
3. Call 1 866 797-8686 to activate your new PVR.
Images may not be exactly as shown.
Use this tutorial when replacing your PVR receiver with another PVR receiver.
If your television signal has been lost:
-
Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
-
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
.png)