1. Turn on your TV and your Fibe TV receiver.
The Fibe TV Slim remote can be programmed to both power on and off, and to control the volume of your TV. Programming codes are available online (PDF 70.28 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of televisions, some may not be supported.
To clear the programming for your TV but not for the Fibe HD receiver, press and hold the options button for three seconds, until the green light blinks twice, and then enter 0000.
2. Press and hold the options button for three seconds, until the green light blinks twice.
The Fibe TV Slim remote can be programmed to both power on and off, and to control the volume of your TV. Programming codes are available online (PDF 70.28 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of televisions, some may not be supported.
To clear the programming for your TV but not for the Fibe HD receiver, press and hold the options button for three seconds, until the green light blinks twice, and then enter 0000.
3. Enter the 4-digit code for your TV’s brand (or code 0001 to search all brands).
- If correct, the green light blinks twice.
- If incorrect, it lights up for 2 seconds. Try again.
- If no code was entered within 10 seconds, you need to start over.
The Fibe TV Slim remote can be programmed to both power on and off, and to control the volume of your TV. Programming codes are available online (PDF 70.28 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of televisions, some may not be supported.
To clear the programming for your TV but not for the Fibe HD receiver, press and hold the options button for three seconds, until the green light blinks twice, and then enter 0000.
4. Press and hold the power button until your TV turns off.
This could take up to 5 minutes (or up to 15 minutes if searching all brands). The green light will slowly blink as the remote cycles through the codes.
The Fibe TV Slim remote can be programmed to both power on and off, and to control the volume of your TV. Programming codes are available online (PDF 70.28 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of televisions, some may not be supported.
To clear the programming for your TV but not for the Fibe HD receiver, press and hold the options button for three seconds, until the green light blinks twice, and then enter 0000.
5. Let go of the power button and press select. The green light will blink twice.
If the green light blinks five times, a match wasn’t found. Please start again using code 0001 to search all brands.
The Fibe TV Slim remote can be programmed to both power on and off, and to control the volume of your TV. Programming codes are available online (PDF 70.28 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of televisions, some may not be supported.
To clear the programming for your TV but not for the Fibe HD receiver, press and hold the options button for three seconds, until the green light blinks twice, and then enter 0000.
