Tip: Check the instructions in your self-install kit (if applicable) to find out which equipment you need to pair your receiver with. If you are not able to set up the device after following these steps, please contact us.
2.
Disconnect all other cables from your current receiver and connect them to the matching connections on your new receiver.
Images may not be exactly as shown.
After completing these steps, proceed to one of the following tutorials:
Tip: Check the instructions in your self-install kit (if applicable) to find out which equipment you need to pair your receiver with. If you are not able to set up the device after following these steps, please contact us.
3.
Connect your TV to the Fibe TV receiver using the Bell-branded HDMI cable that came with it.
Images may not be exactly as shown.
After completing these steps, proceed to one of the following tutorials:
Tip: Check the instructions in your self-install kit (if applicable) to find out which equipment you need to pair your receiver with. If you are not able to set up the device after following these steps, please contact us.
4.
Connect the new receiver to a power outlet using the cable that came with it. This will turn on the receiver.
Note: It is normal for the lights on the receiver to flicker while starting up.
Images may not be exactly as shown.
After completing these steps, proceed to one of the following tutorials:
Tip: Check the instructions in your self-install kit (if applicable) to find out which equipment you need to pair your receiver with. If you are not able to set up the device after following these steps, please contact us.
5.
Use your TV remote to turn on your TV and select the HDMI input that matches the connection from step 1 (HDMI 1, HDMI 2, Video 1, etc.).
Images may not be exactly as shown.
After completing these steps, proceed to one of the following tutorials:
Tip: Check the instructions in your self-install kit (if applicable) to find out which equipment you need to pair your receiver with. If you are not able to set up the device after following these steps, please contact us.
6.
Wait up to 5 minutes for the Fibe TV pairing screen to appear on your TV.
Images may not be exactly as shown.
After completing these steps, proceed to one of the following tutorials:
Tip: Check the instructions in your self-install kit (if applicable) to find out which equipment you need to pair your receiver with. If you are not able to set up the device after following these steps, please contact us.