1. Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver. If you have a coaxial connection, use the wrench provided to tighten the cable. Be careful not to over tighten.
Images may not be exactly as shown.
If this is a new receiver continue to How to activate your wired HD receiver or PVR or How to activate your wireless HD receiver only once pairing is completed.
If you are not able to pair the device after following these steps, please contact us.
2. Connect the new receiver to a power outlet using the cable that came with it. This will turn on the receiver.
Note: It is normal for the lights on the receiver to flicker while starting up.
Images may not be exactly as shown.
If this is a new receiver continue to How to activate your wired HD receiver or PVR or How to activate your wireless HD receiver only once pairing is completed.
If you are not able to pair the device after following these steps, please contact us.
3. Turn on your TV and select the input that matches the connection from step 1 (HDMI 1, HDMI 2, Video 1, etc.).
Within 5 minutes, the registration app will appear on your TV.
Images may not be exactly as shown.
If this is a new receiver continue to How to activate your wired HD receiver or PVR or How to activate your wireless HD receiver only once pairing is completed.
If you are not able to pair the device after following these steps, please contact us.