How to replace your wired receiver
Nova
Steps to follow: 3
1. Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver. If you have a coaxial connection, use the wrench provided to tighten the cable. Be careful not to over tighten.
If your television signal has been lost:
- Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
- Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in
2. Once you have connected the receiver to a power outlet, the light on the front of the receiver will be green. This could take several minutes.
If your television signal has been lost:
- Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
- Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in
3. The Fibe TV logo will appear on your TV screen when it is ready for use. Press Select to watch TV.
If your television signal has been lost:
- Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
- Reboot your modem by unplugging the power cable on the back of the modem and plugging it back in
.png)