1.
Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver.

If your television signal has been lost:

Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
Reboot your modem by unplugging the power cable and plugging it back in

2.
Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.

Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.

If your television signal has been lost:

Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
Reboot your modem by unplugging the power cable and plugging it back in

3.
Once you've set up your transmitter, turn on the device.

If your television signal has been lost:

Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
Reboot your modem by unplugging the power cable and plugging it back in

4.
On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.

If your television signal has been lost:

Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
Reboot your modem by unplugging the power cable and plugging it back in

5.
Press the transmitter's WPS button. The bottom green light will begin to flash.

If your television signal has been lost:

Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
Reboot your modem by unplugging the power cable and plugging it back in

6.
Within 2 minutes, go back to your receiver and press OK.

If your television signal has been lost:

Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
Reboot your modem by unplugging the power cable and plugging it back in

7.
The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.

If your television signal has been lost:

Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
Reboot your modem by unplugging the power cable and plugging it back in

SHOP MOBILITY

SHOP INTERNET

SHOP TV

SHOP SMART HOME

SHOP HOME PHONE

SHOP BUNDLES

Need help?

How to replace your wireless receiver

MxV3/V4

1.
Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver.

2.
Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.

3.
Once you've set up your transmitter, turn on the device.

4.
On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.

5.
Press the transmitter's WPS button. The bottom green light will begin to flash.

6.
Within 2 minutes, go back to your receiver and press OK.

7.
The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.

Need help?

How to replace your wireless receiver

MxV3/V4

1. Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver.

2. Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.

3. Once you've set up your transmitter, turn on the device.

4. On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.

5. Press the transmitter's WPS button. The bottom green light will begin to flash.

6. Within 2 minutes, go back to your receiver and press OK.

7. The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.

1.
Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver.

2.
Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.

3.
Once you've set up your transmitter, turn on the device.

4.
On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.

5.
Press the transmitter's WPS button. The bottom green light will begin to flash.

6.
Within 2 minutes, go back to your receiver and press OK.

7.
The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.