Skip to main content
Fibe TV
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to replace your transmitter (VAP)

MxV3/V4

Steps to follow: 7

1.
Disconnect all cables from your current transmitter and connect the provided Ethernet and power adapter cables to the new transmitter.

Disconnect all cables from your current transmitter and connect the provided Ethernet and power adapter cables to the new transmitter.Disconnect all cables from your current transmitter and connect the provided Ethernet and power adapter cables to the new transmitter.

If your television signal has been lost:

  • Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
  • Reboot your modem by unplugging the power cable and plugging it back in

2.
Once you've set up your transmitter, turn on the device.

Once youOnce you

If your television signal has been lost:

  • Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
  • Reboot your modem by unplugging the power cable and plugging it back in

3.
On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.

On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.

If your television signal has been lost:

  • Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
  • Reboot your modem by unplugging the power cable and plugging it back in

4.
Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.

Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.

If your television signal has been lost:

  • Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
  • Reboot your modem by unplugging the power cable and plugging it back in

5.
Go back to the transmitter and press the WPS button. The bottom green light will begin to flash.

Go back to the transmitter and press the WPS button. The bottom green light will begin to flash.Go back to the transmitter and press the WPS button. The bottom green light will begin to flash.Go back to the transmitter and press the WPS button. The bottom green light will begin to flash.Go back to the transmitter and press the WPS button. The bottom green light will begin to flash.

If your television signal has been lost:

  • Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
  • Reboot your modem by unplugging the power cable and plugging it back in

6.
Within 2 minutes, go back to your receiver and press OK.

Within 2 minutes, go back to your receiver and press OK.Within 2 minutes, go back to your receiver and press OK.Within 2 minutes, go back to your receiver and press OK.Within 2 minutes, go back to your receiver and press OK.

If your television signal has been lost:

  • Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
  • Reboot your modem by unplugging the power cable and plugging it back in

7.
The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.

Note: Repeat this tutorial for every wireless receiver installed in your home.

The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.Note: Repeat this tutorial for every wireless receiver installed in your home.The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.Note: Repeat this tutorial for every wireless receiver installed in your home.The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.Note: Repeat this tutorial for every wireless receiver installed in your home.The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.Note: Repeat this tutorial for every wireless receiver installed in your home.The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press Select to watch TV.Note: Repeat this tutorial for every wireless receiver installed in your home.

If your television signal has been lost:

  • Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
  • Reboot your modem by unplugging the power cable and plugging it back in