How to reboot the modem for Fibe TV service

MxV3 Remote

Steps to follow: 6

On your modem, locate the power cable.
Remove the cable. Wait 10 seconds and reinsert the cable.
The lights on the front of your modem (except for the power LED) will blink as the modem goes through its start-up routine.
Wait until the WAN, INTERNET and TV lights turn blue. This indicates that your modem is ready for use.
Make sure your Fibe Internet service is working, then reboot your HD PVR and receivers.
On your HD PVR, press and hold the POWER button for 5 seconds (until the red, green and blue lights come on) and wait for the TV service to come back.
Repeat the process with your other Fibe TV receivers.

1. On your modem, locate the power cable.

2. Remove the cable. Wait 10 seconds and reinsert the cable.

3. The lights on the front of your modem (except for the power LED) will blink as the modem goes through its start-up routine.

4. Wait until the WAN, INTERNET and TV lights turn blue. This indicates that your modem is ready for use.

5. Make sure your Fibe Internet service is working, then reboot your HD PVR and receivers.
On your HD PVR, press and hold the POWER button for 5 seconds (until the red, green and blue lights come on) and wait for the TV service to come back.

Bell Stores

Book an appointment

Mobility

Bundles

TV

Internet

Home phone

Smart Home

Promotions

Support overview

Billing & Accounts

Mobility

TV

Internet

Home phone

Smart Home

My services

My bills

My profile

Small business services

Medium & Large Business

Need help?

How to reboot the modem for Fibe TV service

MxV3 Remote

1. On your modem, locate the power cable.

2. Remove the cable. Wait 10 seconds and reinsert the cable.

3. The lights on the front of your modem (except for the power LED) will blink as the modem goes through its start-up routine.

4. Wait until the WAN, INTERNET and TV lights turn blue. This indicates that your modem is ready for use.

5. Make sure your Fibe Internet service is working, then reboot your HD PVR and receivers.
On your HD PVR, press and hold the POWER button for 5 seconds (until the red, green and blue lights come on) and wait for the TV service to come back.

6. Repeat the process with your other Fibe TV receivers.

Was this article useful?

Recently viewed articles

Need help?

How to reboot the modem for Fibe TV service

MxV3 Remote

1. On your modem, locate the power cable.

2. Remove the cable. Wait 10 seconds and reinsert the cable.

3. The lights on the front of your modem (except for the power LED) will blink as the modem goes through its start-up routine.

4. Wait until the WAN, INTERNET and TV lights turn blue. This indicates that your modem is ready for use.

5. Make sure your Fibe Internet service is working, then reboot your HD PVR and receivers.On your HD PVR, press and hold the POWER button for 5 seconds (until the red, green and blue lights come on) and wait for the TV service to come back.

6. Repeat the process with your other Fibe TV receivers.

Was this article useful?

Related articles

Recently viewed articles

5. Make sure your Fibe Internet service is working, then reboot your HD PVR and receivers.
On your HD PVR, press and hold the POWER button for 5 seconds (until the red, green and blue lights come on) and wait for the TV service to come back.