1. Turn on your TV. On your MxV4 remote, press and hold TV.
Repeat the steps above to set up your DVD player or other device.
You can program your Fibe TV remote to control other devices such as your TV set. Codes for other devices are available online (PDF 382.37 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of television, some may not be supported.
2. Press the SETUP key until the TV mode key blinks twice.
Repeat the steps above to set up your DVD player or other device.
You can program your Fibe TV remote to control other devices such as your TV set. Codes for other devices are available online (PDF 382.37 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of television, some may not be supported.
3. Enter the 4-digit code for your TV.
Repeat the steps above to set up your DVD player or other device.
You can program your Fibe TV remote to control other devices such as your TV set. Codes for other devices are available online (PDF 382.37 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of television, some may not be supported.
4. Press POWER once. The TV should turn off.
If the TV stays on, repeat these steps, trying each code listed for your TV model
Repeat the steps above to set up your DVD player or other device.
You can program your Fibe TV remote to control other devices such as your TV set. Codes for other devices are available online (PDF 382.37 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of television, some may not be supported.
5. Your Fibe TV remote should now be programmed to work with your TV.
Repeat the steps above to set up your DVD player or other device.
You can program your Fibe TV remote to control other devices such as your TV set. Codes for other devices are available online (PDF 382.37 KB) and in the manual. Unfortunately, while we try to accommodate most makes and models of television, some may not be supported.
.png)