Skip to main content
Fibe TV
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to pair the Fibe Wireless Receiver (VIP2502) to the Wireless Receiver Transmitter (VAP2500)

MxV3/V4

Steps to follow: 6

1.
Turn on the Wireless Receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.

Turn on the Wireless Receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.Turn on the Wireless Receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.

If you are not able to pair the devices after following the steps, please contact us for help.

2.
Once you see the connection instructions appear on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.

Once you see the connection instructions appear on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.Once you see the connection instructions appear on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.

If you are not able to pair the devices after following the steps, please contact us for help.

3.
On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.

On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.

If you are not able to pair the devices after following the steps, please contact us for help.

4.
Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.

Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.Press the WPS button on the Wireless Receiver Transmitter. The bottom green LED will begin to flash.

If you are not able to pair the devices after following the steps, please contact us for help.

5.
Within 2 minutes, go back to the Wireless Receiver and press the OK button.

Within 2 minutes, go back to the Wireless Receiver and press the OK button.Within 2 minutes, go back to the Wireless Receiver and press the OK button.Within 2 minutes, go back to the Wireless Receiver and press the OK button.Within 2 minutes, go back to the Wireless Receiver and press the OK button.

If you are not able to pair the devices after following the steps, please contact us for help.

6.
The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.

The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.

If you are not able to pair the devices after following the steps, please contact us for help.