How to replace your transmitter (VAP)
Steps to follow: 7
1. Disconnect all cables from your current transmitter and connect the provided Ethernet and power adapter cables to the new transmitter.
Images may not be exactly as shown.
Use this tutorial when you are replacing your old transmitter with a new transmitter.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in.
2. Once you've set up your transmitter, turn on the device.
Images may not be exactly as shown.
Use this tutorial when you are replacing your old transmitter with a new transmitter.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in.
3. On the front of the transmitter, confirm that the Wi-Fi signal light is either solid green or flashing green.
Images may not be exactly as shown.
Use this tutorial when you are replacing your old transmitter with a new transmitter.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in.
4. Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.
Images may not be exactly as shown.
Use this tutorial when you are replacing your old transmitter with a new transmitter.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in.
5. Go back to the transmitter and press the WPS button. The bottom green light will begin to flash.
Images may not be exactly as shown.
Use this tutorial when you are replacing your old transmitter with a new transmitter.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in.
6. Within 2 minutes, go back to your receiver and press OK.
Images may not be exactly as shown.
Use this tutorial when you are replacing your old transmitter with a new transmitter.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in.
7. The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press SELECT to watch TV.
Note: Repeat this tutorial for every wireless receiver installed in your home.
Note: Repeat this tutorial for every wireless receiver installed in your home.
Images may not be exactly as shown.
Use this tutorial when you are replacing your old transmitter with a new transmitter.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in.
.png)