Skip to main content
Bell Satellite TV
Log in / Register
Your current region:   Ontario
Select your province or territory below:
Close province setting

My Bell Satellite TV (9241 HD PVR Plus receiver) channels change by themselves

9241 - HD PVR Plus

Steps to follow: 8

1.
Press SYSTEM INFO to display the System Information screen.

Press SYSTEM INFO to display the System Information screen.Press SYSTEM INFO to display the System Information screen.

2.
Take note of the number beside the remote address field.

Take note of the number beside the remote address field.Take note of the number beside the remote address field.Take note of the number beside the remote address field.

3.
Press and hold SAT until TV, VCR and AUX light up.

Press and hold SAT until TV, VCR and AUX light up.Press and hold SAT until TV, VCR and AUX light up.Press and hold SAT until TV, VCR and AUX light up.Press and hold SAT until TV, VCR and AUX light up.Press and hold SAT until TV, VCR and AUX light up.

4.
Release SAT. It should start to flash.

Release SAT. It should start to flash.Release SAT. It should start to flash.

5.
While SAT is flashing, enter any number from 1 to 16, as long as it's different from the one that is already in the remote address field.

While SAT is flashing, enter any number from 1 to 16, as long as itWhile SAT is flashing, enter any number from 1 to 16, as long as it

6.
After entering the number, press #. The SAT light will flash 3 times.

After entering the number, press #. The SAT light will flash 3 times.After entering the number, press #. The SAT light will flash 3 times.

7.
Press RECORD.
The remote address field on the system info screen should now be the same as the code entered in step 5.

Press RECORD.The remote address field on the system info screen should now be the same as the code entered in step 5.Press RECORD.The remote address field on the system info screen should now be the same as the code entered in step 5.

8.
Scroll to and select Done.

Scroll to and select Done.Scroll to and select Done.Scroll to and select Done.Scroll to and select Done.Scroll to and select Done.