My Bell Satellite TV (6131/6141 HD receiver) channels change by themselves

6141 - HD Receiver

Steps to follow: 8

Press SYS INFO to display the System Information screen.
Take note of the number beside the remote address field.
Press and hold SAT until TV, VCR and AUX light up.
Release SAT. It should start to flash.
While SAT is flashing, enter any number from 1 to 16, as long as it's different from the one that is already in the remote address field.
After entering the number, press #. The SAT light will flash 3 times.
Press RECORD.
The remote address field on the system info screen should now be the same as the code entered in step 5.
Scroll to and select Done.

1. Press SYS INFO to display the System Information screen.

Bell Stores

Book an appointment

Mobility

Bundles

TV

Internet

Home phone

Smart Home

Support overview

Billing & Accounts

Mobility

TV

Internet

Home phone

Smart Home

My services

My bills

My profile

Small Business mobile solutions

Small business services

Medium & Large Business

Need help?

My Bell Satellite TV (6131/6141 HD receiver) channels change by themselves

6141 - HD Receiver

1. Press SYS INFO to display the System Information screen.

2. Take note of the number beside the remote address field.

3. Press and hold SAT until TV, VCR and AUX light up.

4. Release SAT. It should start to flash.

5. While SAT is flashing, enter any number from 1 to 16, as long as it's different from the one that is already in the remote address field.

6. After entering the number, press #. The SAT light will flash 3 times.

7. Press RECORD.
The remote address field on the system info screen should now be the same as the code entered in step 5.

8. Scroll to and select Done.

Was this article useful?

Recently viewed articles

Need help?

My Bell Satellite TV (6131/6141 HD receiver) channels change by themselves

6141 - HD Receiver

1. Press SYS INFO to display the System Information screen.

2. Take note of the number beside the remote address field.

3. Press and hold SAT until TV, VCR and AUX light up.

4. Release SAT. It should start to flash.

5. While SAT is flashing, enter any number from 1 to 16, as long as it's different from the one that is already in the remote address field.

6. After entering the number, press #. The SAT light will flash 3 times.

7. Press RECORD.The remote address field on the system info screen should now be the same as the code entered in step 5.

8. Scroll to and select Done.

Was this article useful?

Related articles

Recently viewed articles

7. Press RECORD.
The remote address field on the system info screen should now be the same as the code entered in step 5.