How to program your Bell Satellite TV (3100/ 4100 Digital Receiver) remote to operate your VCR or DVD player

4100 - Digital Receiver

Steps to follow: 11

On your Satellite TV remote, press MENU.
Scroll to and select System Setup.
Scroll to and select Installation.
Scroll to and select VCR Setup.
Enter the 3-digit VCR code number.
Insert a tape into the VCR.
To test the new code, scroll to and select Test.
The receiver will display a warning to make sure the VCR is on, select OK to start the test.
Once the test is complete, follow the instructions in the message.
If your VCR did not do the test, enter another code from the table and repeat steps 7, 8 and 9.
Once you've found the correct VCR code, scroll to and select Save to save the VCR code.
Test the remote with your VCR.

1. On your Satellite TV remote, press MENU.

2. Scroll to and select System Setup.

3. Scroll to and select Installation.

4. Scroll to and select VCR Setup.

5. Enter the 3-digit VCR code number.

6. Insert a tape into the VCR.

7. To test the new code, scroll to and select Test.

8. The receiver will display a warning to make sure the VCR is on, select OK to start the test.

9. Once the test is complete, follow the instructions in the message.
If your VCR did not do the test, enter another code from the table and repeat steps 7, 8 and 9.

Bell Stores

Book an appointment

Mobility

Bundles

TV

Internet

Home phone

Smart Home

Support overview

Billing & Accounts

Mobility

TV

Internet

Home phone

Smart Home

My services

My bills

My profile

Small Business mobile solutions

Small business services

Medium & Large Business

Need help?

How to program your Bell Satellite TV (3100/ 4100 Digital Receiver) remote to operate your VCR or DVD player

4100 - Digital Receiver

1. On your Satellite TV remote, press MENU.

2. Scroll to and select System Setup.

3. Scroll to and select Installation.

4. Scroll to and select VCR Setup.

5. Enter the 3-digit VCR code number.

6. Insert a tape into the VCR.

7. To test the new code, scroll to and select Test.

8. The receiver will display a warning to make sure the VCR is on, select OK to start the test.

9. Once the test is complete, follow the instructions in the message.
If your VCR did not do the test, enter another code from the table and repeat steps 7, 8 and 9.

10. Once you've found the correct VCR code, scroll to and select Save to save the VCR code.

11. Test the remote with your VCR.

Was this article useful?

Recently viewed articles

Need help?

How to program your Bell Satellite TV (3100/ 4100 Digital Receiver) remote to operate your VCR or DVD player

4100 - Digital Receiver

1. On your Satellite TV remote, press MENU.

2. Scroll to and select System Setup.

3. Scroll to and select Installation.

4. Scroll to and select VCR Setup.

5. Enter the 3-digit VCR code number.

6. Insert a tape into the VCR.

7. To test the new code, scroll to and select Test.

8. The receiver will display a warning to make sure the VCR is on, select OK to start the test.

9. Once the test is complete, follow the instructions in the message.If your VCR did not do the test, enter another code from the table and repeat steps 7, 8 and 9.

10. Once you've found the correct VCR code, scroll to and select Save to save the VCR code.

11. Test the remote with your VCR.

Was this article useful?

Related articles

Recently viewed articles

9. Once the test is complete, follow the instructions in the message.
If your VCR did not do the test, enter another code from the table and repeat steps 7, 8 and 9.