By default, Wi-Fi security is enabled on the Netgear 4G MVBR1210C Turbo Hub. To connect your computer through Wi-Fi, you'll need to know the Turbo Hub's network name (SSID) and passphrase.
Step 1 of 8
Locate the Wi-Fi network name (SSID) printed on the back of the Turbo Hub (e.g., Bell####).
Images may not be exactly as shown.
Step 2 of 8
Locate the WPA/WPA2-PSK Passphrase printed on the back of the Turbo Hub.
Images may not be exactly as shown.
Step 3 of 8
With the Turbo Hub powered on, click the Wireless Network Connection icon on your computer.
Images may not be exactly as shown.
Step 4 of 8
Click on the Turbo Hub network name (e.g., Bell####).
Images may not be exactly as shown.
Step 5 of 8
Click Connect.
Images may not be exactly as shown.
Step 6 of 8
Enter the Turbo Hub passphrase.
Images may not be exactly as shown.
Step 7 of 8
Click OK.
Images may not be exactly as shown.
Step 8 of 8
You are now connected.
Images may not be exactly as shown.
Locate the Wi-Fi network name (SSID) printed on the back of the Turbo Hub (e.g., Bell####).
Locate the WPA/WPA2-PSK Passphrase printed on the back of the Turbo Hub.
With the Turbo Hub powered on, click the Wireless Network Connection icon on your computer.
Click on the Turbo Hub network name (e.g., Bell####).