Skip to main content
Internet
Log in
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to update my Bell Internet user ID and password on my Home Hub 1000 modem

Internet support

Step 1 of 8

Open a web browser.

Open a web browser.

Step 2 of 8

Enter the following in the address bar:

  • When connected to the Internet, enter “ bell.ca/mymodem ”.
  • If you’re not connected, enter “ 192.168.2.1 ”.

Enter the following in the address bar: When connected to the Internet, enter “bell.ca/mymodem”. If you’re not connected, enter “192.168.2.1”.

Step 3 of 8

Click on Fibe Internet.

Click on Fibe Internet.Click on Fibe Internet.Click on Fibe Internet.Click on Fibe Internet.

Step 4 of 8

If prompted, enter the administrator password. Unless you have changed it, the default password is "admin".

If prompted, enter the administrator password. Unless you have changed it, the default password is "admin".If prompted, enter the administrator password. Unless you have changed it, the default password is "admin".If prompted, enter the administrator password. Unless you have changed it, the default password is "admin".

Step 5 of 8

Click on Settings.

Click on Settings.Click on Settings.Click on Settings.Click on Settings.

Step 6 of 8

Enter your Bell Internet user ID (b1xxxxxx) and password.

Enter your Bell Internet user ID (b1xxxxxx) and password.Enter your Bell Internet user ID (b1xxxxxx) and password.Enter your Bell Internet user ID (b1xxxxxx) and password.Enter your Bell Internet user ID (b1xxxxxx) and password.Enter your Bell Internet user ID (b1xxxxxx) and password.

Step 7 of 8

Click on Connect (or Save).

Click on Connect (or Save).Click on Connect (or Save).Click on Connect (or Save).Click on Connect (or Save).

Step 8 of 8

You will see a green check under the Fibe Internet service in approximately 10 seconds.

You will see a green check under the Fibe Internet service in approximately 10 seconds.You will see a green check under the Fibe Internet service in approximately 10 seconds.You will see a green check under the Fibe Internet service in approximately 10 seconds.
  1. Open a web browser.
  2. Enter the following in the address bar:
    • When connected to the Internet, enter “ bell.ca/mymodem ”.
    • If you’re not connected, enter “ 192.168.2.1 ”.
  3. Click on Fibe Internet.
  4. If prompted, enter the administrator password. Unless you have changed it, the default password is "admin".
  5. Click on Settings.
  6. Enter your Bell Internet user ID (b1xxxxxx) and password.
  7. Click on Connect (or Save).
  8. You will see a green check under the Fibe Internet service in approximately 10 seconds.