How to verify that the default Wi-Fi security is on
Connection Hub
Steps to follow: 7
1. Open a web browser.
2. Enter the following in the address bar:
- When connected to the Internet, enter “ bell.ca/mymodem ”.
- If you’re not connected, enter “ 192.168.2.1 ”.
3. When prompted, enter the Connection Hub username (the default is admin).
4. Enter the Connection Hub password (the default is admin).
5. Click OK
6. Click Wireless.
7. Verify that the security type is set to WPA2-PSK (AES).. If it is not, please select it.
.png)