1. Turn on the Wireless Receiver and TV. This may take up to two minutes, during which no lights may be visible on the receiver.
If the problem persists, please contact us for help.
2. Once you see the Connect? message on the TV, go to the Wireless Receiver Transmitter and confirm that it is powered on and connected to the Fibe modem via an Ethernet cable.
If the problem persists, please contact us for help.
3. On the front of the Wireless Receiver Transmitter, confirm that the Wi-Fi LED is either solid green or flashing green.
If the problem persists, please contact us for help.
4. Press the WPS button on the Wireless Receiver Transmitter. The Wi-Fi LED will begin to flash.
If the problem persists, please contact us for help.
5. Within two minutes, go back to the Wireless Receiver and press the OK button. (After two minutes, you'll need to press the transmitter's WPS button again.)
If the problem persists, please contact us for help.
6. The receiver should reconnect to the Wireless Receiver Transmitter and restart. This may take up to two minutes. The Fibe TV logo and green Wi-Fi signal light on the receiver confirms a successful pairing.
If the problem persists, please contact us for help.