Disconnect all cables from your current receiver and connect them to the corresponding connections on your new receiver. If you have a coaxial connection, use the wrench provided to tighten the cable. Be careful not to over tighten.
If your television signal has been lost:
Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
2.
Connect the replacement receiver to a power outlet and it will automatically turn itself on within several minutes.
If your television signal has been lost:
Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)
3.
Call 1 866 797-8686 to activate your new PVR.
If your television signal has been lost:
Check that the Wall-in or Ethernet cable is connected correctly. Only one should be connected
Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, channel 3 or 4, etc.)