1. Connect the receiver to the TV using an HDMI cable.
NOTE: You can also use component video along with composite audio cables or composite audio/video cables to connect the receiver to the TV.
Use this tutorial if you are connecting your very first Fibe TV wireless receiver and transmitter. If this is a second wireless receiver, refer to the "How to connect additional wireless receivers" topic.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in
2. Turn your TV on and connect the receiver to a power outlet. Within 2 minutes your receiver will automatically turn itself on and display connection instructions.
Use this tutorial if you are connecting your very first Fibe TV wireless receiver and transmitter. If this is a second wireless receiver, refer to the "How to connect additional wireless receivers" topic.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in
3. Go to the transmitter and connect it to the Fibe modem using an Ethernet cable and to a power outlet using the provided power adapter.
Use this tutorial if you are connecting your very first Fibe TV wireless receiver and transmitter. If this is a second wireless receiver, refer to the "How to connect additional wireless receivers" topic.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in
4. Turn the transmitter on.
Use this tutorial if you are connecting your very first Fibe TV wireless receiver and transmitter. If this is a second wireless receiver, refer to the "How to connect additional wireless receivers" topic.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in
5. The Wi-Fi light on the transmitter will be solid green or flashing green within 2 minutes.
Use this tutorial if you are connecting your very first Fibe TV wireless receiver and transmitter. If this is a second wireless receiver, refer to the "How to connect additional wireless receivers" topic.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in
6. Press WPS button on the front of the transmitter. The bottom green light will begin to flash.
Use this tutorial if you are connecting your very first Fibe TV wireless receiver and transmitter. If this is a second wireless receiver, refer to the "How to connect additional wireless receivers" topic.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in
7. Within 2 minutes, go back to your receiver and press OK.
Use this tutorial if you are connecting your very first Fibe TV wireless receiver and transmitter. If this is a second wireless receiver, refer to the "How to connect additional wireless receivers" topic.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in
8. The receiver will connect to the transmitter and restart. You will see a Fibe TV logo on your TV and a green Wi-Fi signal light on your receiver when it is ready for use. Press SELECT to watch TV.
Use this tutorial if you are connecting your very first Fibe TV wireless receiver and transmitter. If this is a second wireless receiver, refer to the "How to connect additional wireless receivers" topic.
If your television signal has been lost:
- Ensure your TV is set to the correct input (HDMI1, HDMI2, Video1, etc.)
- Reboot your modem by unplugging the power cable and plugging it back in
