Skip to main content
Dictate your search
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to pair your 4K Whole Home PVR to a Home Hub 3000

Bluetooth® Slim

Steps to follow: 5

1.
Verify that the 4K Whole Home PVR is turned on and that the connection instructions are displayed on the TV.

Verify that the 4K Whole Home PVR is turned on and that the connection instructions are displayed on the TV.Verify that the 4K Whole Home PVR is turned on and that the connection instructions are displayed on the TV.Verify that the 4K Whole Home PVR is turned on and that the connection instructions are displayed on the TV.Verify that the 4K Whole Home PVR is turned on and that the connection instructions are displayed on the TV.

Images may not be exactly as shown.

Before you start, you must complete the installation of your 4K Whole Home PVR.
Reminder: Insert the batteries provided into the back of your remote.

If this is a new PVR, continue to How to activate your 4K Whole Home PVR. once pairing is completed.
If you are not able to pair the device after following these steps, please Contact us.

2.
Press and hold the WPS button on the Home Hub 3000 for 10 seconds until the 5-minute countdown begins.

Note: If you press the WPS button for less than 10 seconds, a 2-minute countdown will begin. The 2-minute countdown is used to connect mobile devices such as tablets and will not work with your Fibe TV receivers. Press the WPS button again to cancel the countdown.

Press and hold the WPS button on the Home Hub 3000 for 10 seconds until the 5-minute countdown begins.Note: If you press the WPS button for less than 10 seconds, a 2-minute countdown will begin. The 2-minute countdown is used to connect mobile devices such as tablets and will not work with your Fibe TV receivers. Press the WPS button again to cancel the countdown.Press and hold the WPS button on the Home Hub 3000 for 10 seconds until the 5-minute countdown begins.Note: If you press the WPS button for less than 10 seconds, a 2-minute countdown will begin. The 2-minute countdown is used to connect mobile devices such as tablets and will not work with your Fibe TV receivers. Press the WPS button again to cancel the countdown.

Images may not be exactly as shown.

Before you start, you must complete the installation of your 4K Whole Home PVR.
Reminder: Insert the batteries provided into the back of your remote.

If this is a new PVR, continue to How to activate your 4K Whole Home PVR. once pairing is completed.
If you are not able to pair the device after following these steps, please Contact us.

3.
Within 2 minutes, point the Bluetooth Slim remote toward your PVR and press the Select button.

Wait up to 5 minutes for the PVR to connect.

Within 2 minutes, point the Bluetooth Slim remote toward your PVR and press the Select button.Wait up to 5 minutes for the PVR to connect.Within 2 minutes, point the Bluetooth Slim remote toward your PVR and press the Select button.Wait up to 5 minutes for the PVR to connect.Within 2 minutes, point the Bluetooth Slim remote toward your PVR and press the Select button.Wait up to 5 minutes for the PVR to connect.Within 2 minutes, point the Bluetooth Slim remote toward your PVR and press the Select button.Wait up to 5 minutes for the PVR to connect.Within 2 minutes, point the Bluetooth Slim remote toward your PVR and press the Select button.Wait up to 5 minutes for the PVR to connect.Within 2 minutes, point the Bluetooth Slim remote toward your PVR and press the Select button.Wait up to 5 minutes for the PVR to connect.

Images may not be exactly as shown.

Before you start, you must complete the installation of your 4K Whole Home PVR.
Reminder: Insert the batteries provided into the back of your remote.

If this is a new PVR, continue to How to activate your 4K Whole Home PVR. once pairing is completed.
If you are not able to pair the device after following these steps, please Contact us.

4.
You will receive a notification on the TV screen once the wireless 4K Whole Home PVR is paired with the Home Hub 3000.

Once connected, your PVR will automatically restart.

Note: It is normal for the lights on the PVR to flicker while restarting.

You will receive a notification on the TV screen once the wireless 4K Whole Home PVR is paired with the Home Hub 3000.Once connected, your PVR will automatically restart.Note: It is normal for the lights on the PVR to flicker while restarting.You will receive a notification on the TV screen once the wireless 4K Whole Home PVR is paired with the Home Hub 3000.Once connected, your PVR will automatically restart.Note: It is normal for the lights on the PVR to flicker while restarting.

Images may not be exactly as shown.

Before you start, you must complete the installation of your 4K Whole Home PVR.
Reminder: Insert the batteries provided into the back of your remote.

If this is a new PVR, continue to How to activate your 4K Whole Home PVR. once pairing is completed.
If you are not able to pair the device after following these steps, please Contact us.

5.
Wait up to 5 minutes for the Fibe TV activation screen to appear on your TV.

Wait up to 5 minutes for the Fibe TV activation screen to appear on your TV.Wait up to 5 minutes for the Fibe TV activation screen to appear on your TV.

Images may not be exactly as shown.

Before you start, you must complete the installation of your 4K Whole Home PVR.
Reminder: Insert the batteries provided into the back of your remote.

If this is a new PVR, continue to How to activate your 4K Whole Home PVR. once pairing is completed.
If you are not able to pair the device after following these steps, please Contact us.