Skip to main content
Dictate your search
Your current region:   Ontario
Select your province or territory below:
Close province setting

How to program the Bell Fibe TV MxV3 remote to work with other devices

MxV3/V4

Steps to follow: 6

1.
Turn on your TV.

Turn on your TV.

Repeat the steps above to set up your DVD player or other device. Codes for most devices are available online (PDF 382.37 KB) and in the manual. Some devices may not be supported.

Get more help with programming, fixing or replacing your Bell Fibe TV remote.

2.
On your MxV3 remote, press and hold TV. While keeping it pressed, press SELECT.

On your MxV3 remote, press and hold TV. While keeping it pressed, press SELECT.On your MxV3 remote, press and hold TV. While keeping it pressed, press SELECT.On your MxV3 remote, press and hold TV. While keeping it pressed, press SELECT.

Repeat the steps above to set up your DVD player or other device. Codes for most devices are available online (PDF 382.37 KB) and in the manual. Some devices may not be supported.

Get more help with programming, fixing or replacing your Bell Fibe TV remote.

3.
Release both buttons. All of the mode buttons will flash and then the TV one will stay lit.

Release both buttons. All of the mode buttons will flash and then the TV one will stay lit.Release both buttons. All of the mode buttons will flash and then the TV one will stay lit.Release both buttons. All of the mode buttons will flash and then the TV one will stay lit.Release both buttons. All of the mode buttons will flash and then the TV one will stay lit.

Repeat the steps above to set up your DVD player or other device. Codes for most devices are available online (PDF 382.37 KB) and in the manual. Some devices may not be supported.

Get more help with programming, fixing or replacing your Bell Fibe TV remote.

4.
Enter the 4-digit code for your TV.

Enter the 4-digit code for your TV.Enter the 4-digit code for your TV.

Repeat the steps above to set up your DVD player or other device. Codes for most devices are available online (PDF 382.37 KB) and in the manual. Some devices may not be supported.

Get more help with programming, fixing or replacing your Bell Fibe TV remote.

5.
Press POWER once. The TV should turn off.
If the TV stays on, repeat these steps, trying each code listed for your TV model.

Press POWER once. The TV should turn off.If the TV stays on, repeat these steps, trying each code listed for your TV model.Press POWER once. The TV should turn off.If the TV stays on, repeat these steps, trying each code listed for your TV model.

Repeat the steps above to set up your DVD player or other device. Codes for most devices are available online (PDF 382.37 KB) and in the manual. Some devices may not be supported.

Get more help with programming, fixing or replacing your Bell Fibe TV remote.

6.
Your Fibe TV remote should now be programmed to work with your TV.

Your Fibe TV remote should now be programmed to work with your TV.

Repeat the steps above to set up your DVD player or other device. Codes for most devices are available online (PDF 382.37 KB) and in the manual. Some devices may not be supported.

Get more help with programming, fixing or replacing your Bell Fibe TV remote.